Anti fog Acrylic Sheet
Product Introduction
Anti fog acrylic is coated with a permanent anti fog coating, it can prevent moisture and steam from generating on the surface even under very humid conditions.
The anti fog coating is better than the best anti fog spray because it is a permanent anti fog film on the surface, you don’t need to spray it all the time. Otherwise, anti fog coating offers excellent optical clarity, scratch resistance, impact resistance, and chemical resistance.
Therefore, the anti fog acrylic sheet and polycarbonate sheet are used for the most visual products, personal protective equipment, cameras, and applications.
Product Specification
Acrylic Sheets With Standard Size
Product Name | Model | Thickness (mm) | Standard Sizes (mm) | Standard Sizes (ft) |
---|---|---|---|---|
Anti fog acrylic sheet | UVAC-AG | From 2 mm to 25 mm | 1220 x 2440 | 4 x 8 |
Note:
- Contact us for custom thickness;
- UVPLASTIC will cut to size upon the requirement of clients;
Properties | Unit | Value |
---|---|---|
Density | g/cm^3 | 1.2 |
Light transmittance | % | >90 |
Tensile Strength | Mpa | >70 |
Tension Modulus of Elasticity | Mpa | >3000 |
Charpy impact strength (unnotched) | KJ/m^2 | >17 |
Flexural strength | Mpa | 100 to 115 |
Distilled water | 25°C, 24 hours | Pass |
Methanol | 100 cycle rubbing | Pass |
Sulfuric acid | 30% concentration | Pass |
Acetone | Pass |
Note:
- The properties shown by the above table are typical values intended for reference and comparison purposes only.
- They are NOT used for design specifications.