Non-Glare Acrylic Sheet
Product Description
Non Glare Acrylic Sheet is designed to minimize glare and reflection with a matte finish, it creates a glare-free view from any angle, but the physical properties are the same as the standard acrylic sheets. Therefore, the non-glare acrylic sheet offers the same can offer a clearer and saturated color while viewing art photos at galleries.
Non-Glare Acrylic Sheets are also called as “Anti Glare Acrylic Sheets” or “Non-Glare Plexiglass”, they are used widely as a frame to display artwork, prints, and photographs at museums, art galleries, and home decoration.
Product Specification
Non Glare Acrylic Sheets
Product Name | Model | Thickness | Sizes (mm) | Color |
---|---|---|---|---|
Non Glare Acrylic Sheet | UVAC-NG | 0.8mm, 1mm, 2mm, 3mm, 4mm, 6mm | 1220 x 2400 | Clear |
Note:
- UVPLASTIC can cut to size upon the requirement of clients;
Physical Properties
Properties | Unit | Value |
---|---|---|
Light transmittance | % | >80 |
Haze | % | 10±2 |
Roughness | μm | 0.15±0.05 |
Density (Clear Acrylic) | g/cm^3 | 1.19 |
Surface hardness | >H1 | |
Tensile Strength | Mpa | >70 |
Charpy impact strength (unnotched) | KJ/m^2 | >13 |
Tension Modulus of Elasticity | Mpa | >3000 |
Tensile Strain at break | % | >4 |
Flexural strength | Mpa | 100 to 115 |
Charpy impact strength (unnotched) | KJ/m^2 | >17 |
Vicat softening temperature | °C | >105 |
Dimensional change on heating (shrinkage) | % | <2.5 |
Total luminous transmittance | % | >90 |
Linear expansion coefficient | K^ -1 | 7×10^-5 |
Temperature of deflection under load | °C | 95 to 100 |
Flame retardant rating | UL-94 | V0 or V2 |
Note:
- The properties shown by the above table are typical values intended for reference and comparison purposes only.
- They are NOT used for design specifications.